SMOK has done it again and is bringing the fire power with their new Mag 225W Mod and TFV12 Prince Tank. With its ergonomically design you won’t hesitate to pull the trigger! You’ll feel like you are loading a real mag, with all the fun and excitement you’d expect from a mod like this, with a style that is unique and sleek.
The large HD color screen gives you your specific data while the TFV12 Prince Tank holds an outstanding 8ml. The SMOK Mag Kit has truly set the standard!! It will give you the vape you want and the style you need. So get your 18650 batteries ready to lock and load and keep it cloudy!
The Original Vandy Vape Bonza RDA is a 24mm diameter dripper adopts innovative Fixed screw clamp post to make coil building much easier. The juice is deep enough to hold about 2ml e-juice. The cap comes with 24 airholes on both sides (12 per side) for side airflow control. Food grade resin drip tip and Delrin drip are included.This itm also has many color to choose. The RDA comes with bottom feeder pin.
Specs & Features
Food grade resin drip tip
Fixed screw clamp post
Single and dual coil configuration
Side airflow system
Bottom feed directly to side juice wells
Squonk pin and 510 pin included
24mm overall diameter
Vandy Vape Pulse Squonk Mod
The Pulse Squonk Box Mod from Vandy Vape, is an affordable squonk mod for everyone. It features lockable power switch for safety concern, spring loaded 510 connection, 8ml food grade silicone bottle for squonking and replaceable front and back panels. The Pulse BF Box Mod is powered 1 x 20700 battery, and can be compatible with 18650 by using battery adapter (battery not included).
SMOK G-Priv 2 Mod
The SMOK G Priv 2 Mod is back - slimmer yet stronger! Available now for PRE-ORDER, the SMOK G-Priv 2 is 6.5mm thinner and over 20 grams lighter than the original, but can generate 10 more watts of power. Dual 18650 cells in series deliver up to 230W to atomizers with resistance as low as 0.1ohm in wattage mode, and as low as 0.06ohm in temp control modes (Ni/Ti/SS/TCR).
The Thermo RDA Tank by Innokin is a rebuildable drip atomizer with a two post clamp style build deck, redirected bottom airflow, has a 810 proprietary drip tip, a bottom and side airflow system and an innovative gold section in the middle meant for anti-spit back. Under the cap is a wide build deck with two large clamp style posts and redirected airflow channels that are raised above the juice well for enhanced flavor production and a wind storm system that helps users deliver big clouds without the sacrifice of flavor. The outside of the Vaping RDAs, features an adjustable mid airflow control ring, and a non-adjustable bottom airflow. Innokin Thermo RDA is a beautifully designed high end atomizer perfect for those looking for a larger RDA for large format coils.
Specs & Features:
Diameter: 25mm
510 Threaded
Stainless Steel Construction
Wide-Bore Resin Tip
Spit-Back Guard
Large Build Deck
Clamp Style Posts
Air Flow Control
Deep Juice Well
Package Includes:
1x Innokin Thermo RDA Tank
Spare Parts
Smoant Charon TS Mod
The Smoant Charon TS Mod is the next flagship output technology by Smoant, integrating a visually striking chassis with a built-in chipset capable of firing up to 218W alongside a suite of sophisticated temperature control setting. The Charon 218W adopts a curved chassis structural with genuine leather wrapped battery cover to create a cohesive yet modernize showcase piece. The stylish battery door adds a luxurious look as well as comfortable feel while in hand, while providing a convenient access to the dual 18650 batteries (sold separately). Built with user-friendly and performance in-mind, the Charon integrates an advanced chipset capable of firing up to 218W and comprehensive temperature control regulation with support for Ni200 Nickel, Titanium, and Stainless Steel heating element. The Charon 218 also implements Temperature Coefficient of Resistance (TCR) adjustments, a proprietary technology to adjust resistance of a wide range of heating elements to different ranges. With a class-leading chassis design combined with ample performance range, the Smoant Charon 218W TC Box Mod is the perfect follow up to the Battlestar series.
Specs & Features:
Zinc alloy construction
Power range: 1~218W
Support resistance low to 0.1ohm
Four heating modes: Min / Norm / Hard / Max
Full temperature control:
Support Nickel 200 / Titanium / Stainless Steel / TCR
Digiflavor Pharaoh Mini RTA is a new Rip Trippers project with 24mm atomizer and 2ml e-liquid capacity (could be extended to 5ml with expansion tube). It features interchangeable build deck design, domical top chamber, chamber lock system for securing juice port, classic mechanical style juice control to prevent leakage and thick 810 drip tip to protect mouth from heat. The Pharaoh Mini Vape RTA provides best vaping experience to you.
Specs & Features:
Diameter: 24mm
Comes with both 810 and 510 drip tip
Interchangeable deck
Additional velocity build deck included
Red Orings included to match RED drip tip
2ml and 5ml capacity included
Chamber lock system securing juice port ring and chamber.
Domical chamber for better flavor
Thick 810 drip tip to protect mouth from heat
Classic mechanical style juice control system to prevent leakage
Top juice refill system
Package Includes:
1 x Pharaoh Mini RTA
1 x 510 Drip Tip Adapter
1 x Allen Key
1 x Spare Glass 2ml
1 x 510 Wide Bore Drip Tip
1 x Red 810 Drip Tip
1 x User Manual
Snowwolf Vfeng Mod
The Authentic Snow wolf Vfeng 230W VW Variable Wattage Box Mod is constructed from zinc alloy and stainless steel, coming with mechanical shape. Powered by 2 x High drain 18650 batteries, Snowwolf Vfeng can reach maximum output up to 230W. It has a 1.3 inch TFT color screen, while on the back side there is changeable LED Snowwolf logo.
Specs & Features:
Size:46*34*87mm
Material:Zinc Alloy + SS
Screen:1.30” TFT color screen
Watt Range:10-230W
Battery:Dual High-rate 18650
Support color screen changing
Robot shaped form factor
Snowwolf logo with changeable LED
LED colors: pink, yellow, blue, purple, red, green
The Innokin Thermo RDA is a new addition to Innokin's Atomizers. With 25mm Diameter, large Velocity style build deck, side and bottom air flow the Thermo Vape RDA Tanks compliments the design of cyclone air flow and resin drip tip to provide great vaping experience.
Specs & Features:
25mm build deck
Resin Drip tip
Wind storm System (Cyclone Style Airflow)
Interchangable Clamp Style deck
Interchangable Velocity Style Build deck
Bottom and adjustable Side Airflow
Anti-Spitback Design
24k Gold Chimney
Package Includes:
1x Innokin Thermo RDA Tank
Spare Parts
VOOPOO Black DRAG Resin Mod
The VOOPOO Black Drag Resin Mod is very popular among vapers. Now the Black Drag Resin is coming, which has a black zinc alloy frame with colorful resin panel. Powered by the 32-bit super US Gene Fun chip, the DRAG can bring what you have always wanted - max 157W output power, powerful temperature control of Ni, Ti and SS coils, super mode and the fastest fire speed ever at 0.025s. You can always keep the mod up-to-date with upgradeable firmware too so you will never miss anything new.
Specs & Features:
Powered by the GENE Chip
VooPoo PC APP for Windows PC
Dimensions: 3-9/16" x 2-1/8" x 15/16"
Comfortably Fits 24mm Diameter Tanks
Operating Wattage: 5.0 - 157.0W
Temperature Control Mode: Ni200 / Ti/ NiChrome/ SS316/ TCR/ CCR
Temperature Control Range: 100 - 315C / 200 - 600F
Resistance Range: 0.05 - 1.5ohm for Temperature Control Mode
Resistance Range: 0.05 - 3.0ohm for Variable Wattage
Accurate Temperature Control and Wattage
Instant Fire Speed: 0.025s
Tactile Fire and Adjustment Buttons
0.91" OLED Display Screen
Carbon Fiber Design
Requires (2) High Amp 18650 Batteries (Sold Separately)
Vandy Vape Bonza RDA is a bottom fed dripping atomizer designed by The Vaping Bogan. Feature with the gold-plated fixed screw clamp post building deck, it is convenient to be built with Single or Dual Coil by the DIY lover. With the concentrated side air-flow system, it brings you the dense flavor. The Vandy Vape Bonza 24 RDA uses the popular 810 drip tip system and comes with a ULTEM wide-bore Drip tip, a Delrin wide bore smooth drip tip and a 510 drip tip adapter, which was designed for maximizing flavor and vapor production in a leak resistant platform ideal for your bottom feeding squonk setup.
Pulse BF Squonk Mod from Vandy Vape, is the brand new Squonks Mod from Vandy Vape. It can compatible with the 18650 and 20700 battery. The Vandy Vape Pulse BF Mod is the best squonk mod to fit for your RDA. With the compact size, easy refill, more safe and good price, the Vandy Vape Pulse BF mod will be the good choice for you.
Specs & Features:
Size: 77*50*27mm
Thread Type: Spring loaded 510
Capacity: 8ml
Battery: 18650 / 20700 (not included)
Maximum current: 40A
Material:Nylon+ABS(High temperature resistant)
Battery Type: Single 18650 battery or Single 20700 battery
The Innokin Thermo RDA Tank is a new addition to Innokin's Atomizers. With 25mm Diameter, large Velocity style build deck, side and bottom air flow the Thermo Vape RDA Tanks compliments the design of cyclone air flow and resin drip tip to provide great vaping experience.
Specs & Features:
25mm build deck
Resin Drip tip
Wind storm System (Cyclone Style Airflow)
Interchangable Clamp Style deck
Interchangable Velocity Style Build deck
Bottom and adjustable Side Airflow
Anti-Spitback Design
24k Gold Chimney
Package Includes:
1x Innokin Thermo RDA Tank
Spare Parts
SMOK G PRIV 2 Mod
SMOK does it again with another improvement on an already great device with the G-Priv 2! The newly revised G-Priv 2 has had its wattage boosted to 230.0 watts. The G Priv 2 retains it's large touch screen and the stealth firing mechanism that its predecessor had. The device features and easy to use battery door for to make swapping out batteries a breeze. The SMOK GPRIV 2 requires 2x 18650 sized batteries (not included).
Specs & Features:
Dual High-Amp 18650 Battery - Not Included
Wattage Output Range: 1-230W
Min Atomizer Resistance: 0.06ohm
Temperature Range: 200-600F
Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
Superior Zinc Alloy Construction
Super Large OLED Touch Screen - Shatter Resistance
Screen-Lock Button - Simplify Operation
Five Drawing Effects: Min, Max, Soft, Normal, Hard
Temperature Coefficient of Resistance (TCR) Adjustments
SMOK does it again with another improvement on an already great device with the G-Priv 2 Mod! The newly revised G-Priv 2 has had its wattage boosted to 230.0 watts. The G Priv 2 retains it's large touch screen and the stealth firing mechanism that its predecessor had. The device features and easy to use battery door for to make swapping out batteries a breeze. The SMOK GPRIV 2 requires dual 18650 sized batteries (not included).
Specs & Features:
Dual High-Amp 18650 Battery - Not Included
Wattage Output Range: 1-230W
Min Atomizer Resistance: 0.06ohm
Temperature Range: 200-600F
Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
Superior Zinc Alloy Construction
Super Large OLED Touch Screen - Shatter Resistance
Screen-Lock Button - Simplify Operation
Five Drawing Effects: Min, Max, Soft, Normal, Hard
Temperature Coefficient of Resistance (TCR) Adjustments
User-Friendly Interface
Stealth Firing Bar Mechanism
Magnetized Battery Cover - Carbon Fiber Inlay
Package Includes:
1 x G-Priv 2 Mod
1 x USB Cable
1 x User Manual
1 x Set of Spare Parts
Lostvape Paranormal DNA166 Mod
The Lost Vape Paranormal DNA166 Mod utilizes Evolv’s DNA250 board and is powered by two high amp 18650 batteries with a series battery configuration. Constructed of durable die cast zinc alloy with a premium feel, the Paranormal DNA166 includes interchangeable carbon fiber and wood panel inlays with a subtle yet beautiful artificial turtle shell ring to complete its exterior design. In addition, its chassis features rounded edges coupled with foam cushioned leather panel wraps for ultra comfortability. The front of the Paranormal DNA166 Box Mods feature a Stainless Steel faceplate and buttons with a High Definition OLED screen that clearly displays essential data. With Evolv’s Escribe software, users can fully customize all aspects of the interface and monitor user experience.
Specs & Features:
Powered by Evolv DNA250 Board
Firmware upgradeable
On board reverse polarity protections
Dual 18650 cells setup for long-lasting power
Temperature Limit: 200F-600F
Output power: 1Watt-166Watts
Body material: Die Cast Zinc Alloy
Artificial Turtle Shell Decoration Ring
Gun Metal and Stainless Steel Finishes
Electroplating paintwork firms appearance
Included Both Carbon Fiber and Rose Wood Panels
Customized Leather Panel Wraps with Foam Cushion
Slight-out bottom battery sled for battery replacement
Wismec Reuleaux RX2 20700 Kit with GNOME Tank is compatible with both 20700 and 18650 cells. Having a large 1.3inch display and easy-to-go interface, the RX2 20700 is capable of firing up to 200W with dual replaceable cells. With The 2ml/ 4ml capacity GNOME tank and all-new WM coils, RX2 200W TC Kits provide huge vapor and optimal flavor.
Specs & Features:
Battery type: dual 18650/20700 battery
Maximum output: 200W
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Compatible with Both 20700 and 18650 Cells
Compact Size with 200W Max Output
1.3inch Large Display with 2A Quick Charge
Powerful WM Coils for Huge Vapor and Optimal Flavor
Package Includes:
1 x Reuleaux RX2 20700(no cells)
1 x GNOME
1 x WM02 Dual 0.15ohm Head
1 x WM03 Triple 0.2ohm Head
1 x QC USB Cable
2 x User Manual
2 x Warning Card
1 x Set of Spare Parts
Wismec RX GEN3 Kit
Designed by Jaybo, the new WISMEC RX GEN3 is a third generation of Reuleaux family. Powered by triple 18650 batteries, RX GEN3 provides a maximum output power of 300W. The ergonomic design of fire button brings an excellent hand feeling to the users. It also features dual circuit protection to make a safe vaping experience. The huge 1.3-inch OLED display shows the menu and statistics in a clear way. Strong and powerful, RX GEN3 is definitely an ideal device for cloud chasers! 5 colors available.
Specs & Features:
Output Wattage: 1 -300W
Output Mode: VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode
Resistance Range: 0.05-1.5ohm for TC modes/ 0.1-3.5ohm for VW/Bypass mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Tiniest Triple 18650 Mod with 300W Max Output
1.3inch Large Display with User-friendly Interface
Snowwolf VFeng 230W TC Box Mod is unique and has a Robot design, featuring an mechanical shape with scientific and technological sense, innovative big 1.30〞TFT touch screen mechanism and changeable LED SNOWWOLF LOGO. The Vfeng 230W is powered by dual High drain 18650 and the maximum out of 230W. The Vfeng 230W Vape Mods are recognized for its elegance, power and performance. So Vfeng 230W TC Box Mod by Snowwolf is a top-tier premiere vape device, offered at an affordable price. Available in three stunning colors.
Requires (2) 18650 Batteries (Batteries Sold Separately)
Latched Bottom Battery Access Panel
Micro USB (Charging)
USB Charging Support: DC5/2.5A
Customizable SnowWolf LED Logo
LED Colors: Pink, Yellow, Blue, Purple, Green, Red
Robust Design
Spring Loaded 510 Pin
Package Includes:
1x snowwolf Vfeng box mod
1 x USB Cable
1 x User Manual
SMOK Majesty Mod Resin Edition
SMOK Majesty Resin Edition 225W TC Box Mod, can be a special choice for you! It is made of colorful resin, a brand new material with great brightness and various colors, which makes the mod full of artistic features. You can't miss it! It‘s power by dual 18650 batteries and can generate up to 225W of power. Combining with powerful TFV8 X-Baby Tank you can just enjoy vaping.
Specs & Features:
Size: 85.1 x 46.1 x 30.6mm
Wattage Range: 6-225W
Voltage Range: 0.5-9V
Standby Current: <500uA
Batteries: 2 x 18650 batteries (not included)
Resistance: 0.1-3ohm(VW)/0.05-3ohm(TC)
Temperature Range: 200℉-600℉/100℃-315℃
Thread: 510
Two selective editions of Carbon Fiber & Resin Editions